The Knee
Volume 17, Issue 5 , Pages 362-364 , October 2010

Unusual mechanical complications of unicompartmental low contact stress mobile bearing patellofemoral arthroplasty: A cause for concern?

  • B.R.B. Arumilli

      Affiliations

    • Corresponding Author InformationCorresponding author. Department of Trauma & Orthopaedics, Central Manchester University Teaching Hospitals NHS Trust, Manchester Royal Infirmary, Oxford Road, Manchester, M13 9WL, United Kingdom. Tel.: +44 1612761234, +44 7813658499(mobile); fax: +44 1612765069.
  • ,
  • A.B.Y. Ng
  • ,
  • D.J. Ellis
  • ,
  • P. Hirst

Received 11 July 2009 ,Revised 7 October 2009 ,Accepted 10 October 2009.

References 

  1. Argenson JA, Flecher X, Parratte S. Patellofemoral arthroplasty. Clin Orthop Relat Res. 2005;440:50–53
  2. Leadbetter WB, Seyler TM, Ragland PS. Indications, contraindications and pitfalls of patellofemoral arthroplasty. J Bone Jt Surg Am. 2006;88:122–137
  3. Delanois RS, McGrath MS, Ulrich SD, Marker DR, Seyler TM, Bonutti PM, et al. Results of total knee replacement for isolated patellofemoral arthritis: when not to perform a patellofemoral arthroplasty. Orthop Clin North Am. July 2008;vol. 39(3):381–388
  4. Lonner JH. Patellofemoral arthroplasty: the impact of design on outcomes. Orthop Clin North Am. 2008;39:347–354
  5. Ackroyd CE, Newman JH, Evans R, Eldridge JDJ, Joslin CC. The Avon patellofemoral arthroplasty: five year survivorship and functional results. J Bone Jt Surg Br. 2007;89-B:310–315
  6. Ackroyd CE, Newman JH, Evans R, Joslin CC. Five to eight year results on the AVON patellofemoral arthroplasty. J Bone Jt Surg Br. 2008;90-B:324-e-325
  7. Lonner JH. Patellofemoral arthroplasty: pros, cons and design considerations. Clin Orthop Relat Res. 2004;428:158–165
  8. Merchant C. A modular prosthesis for patellofemoral arthroplasty: design and initial results. Clin Orthop Relat Res. Jul 2005;436:40–46
  9. Baech J, Kofoed H. Failure of metal-backed patellar arthroplasty. Acta Orthop Scand. 1991;62(2):166–168
  10. Lombardi AV, Engh GA, Volz RG. Fracture/dissociation of the polyethylene in metal-backed patellar components in total knee arthroplasty. J Bone Jt Surg. 1988;70-A(5):675–679
  11. Sreekumar R, Subramanian S, Mohammed A. Patellar button dissociation in a mobile-bearing LCS patellofemoral joint arthroplasty: case report. J Knee Surg. Online advanced publication posted on 26/11/2008.
  12. Witjes S, Van Den Broek C, Koëter S, Van Loon C. In: Dislocation of the mobile bearing component of a patellofemoral arthroplasty: a report of two cases. vol. 75/3:2009;p. 411–416No. 3
  13. Morra E, Greenwald AS. Patellofemoral replacement polymer stress during daily activities: a finite element study. J Bone Jt Surg. 2006;4:213–2168-A supplement
  14. Australian Orthopaedic Association National Joint Replacement Registry. www.dmac.adelaide.edu.au/aoanjrr/documents/aoanjrrreport_2008.pdf Accessed on July 05, 2009.
  15. Shafi M, Kim YY, Lee YS. Patellar polyethylene peg fracture: a case report and review of literature. Knee Surg Sports Traumatol Arthrosc. 2005;13(6):472–475
  16. Hanna BC, Thompson NW, Wilson DS. Extra-articular migration of the patellar component following total knee arthroplasty. Ulster Med J. May 2002;71(1):57–59
  17. Leadbetter WB. Patellofemoral arthroplasty in the treatment of patellofemoral arthritis: rationale and outcomes in younger patients. Orthop Clin North Am. 2008;39(3):363–380
  18. Blazina ME, Fox JM, Del Pizzo W, Broukhim B, Ivey FM. Patellofemoral replacement. 1979. Clin Orthop Relat Res. Jul 2005;436:3–6

PII: S0968-0160(09)00207-5

doi: 10.1016/j.knee.2009.10.006

The Knee
Volume 17, Issue 5 , Pages 362-364 , October 2010